定制生产工厂 | On request | 先打样再做大货
SuperMadao Custom Patches, Labels & Trims Factory
获取报价

标牌工艺选型指南

不确定用哪种标牌?先横向对比六种工艺,再回答三个问题即可收窄选择。本页所有数据会随报价确认,我们不发布无法承担的数字。

Patch process comparison
工艺 手感厚度立体感细节表现耐水洗拉伸回弹适用基材相对成本
TPU 热转印 Thin, flexibleFlat, printed detailConfirmed by wash test on your fabricMost fabricsSmall text possiblePer design — confirmed with your quoteQuoted per pieceMould and sample first, then bulk
硅胶热转印 Soft rubbery2D or 3D reliefConfirmed by wash test on your fabricMost fabrics, test coatingsLarger than TPU for reliefPer design — confirmed with your quoteQuoted per pieceMould and sample first, then bulk
刺绣 Textured threadRaised thread surfaceConfirmed by wash test on your fabricWoven and knit fabricsSmall text limitedPer design — confirmed with your quoteQuoted per pieceDigitising and sample first, then bulk
织唛 / 织标 Flat, smoothFlatConfirmed by wash test on your fabricMost fabricsBest for fine small textPer design — confirmed with your quoteQuoted per pieceLoom setup and sample first, then bulk
Leather / PVC / rubber FirmEmbossed, debossed or 3DConfirmed by wash test on your fabricDenim, outerwear, bagsDepends on 3D depthPer design — confirmed with your quoteQuoted per pieceMould and sample first, then bulk
Tape, ribbon & draw cord Depends on materialPrinted or woven surfaceConfirmed by wash test on your fabricGarments, bags, hatsBy width, not by artworkPer specification — send lengthQuoted per metre or yardSample first, then bulk

买方提示 · TPU 热转印: 下单前请在你的实际面料上试烫一片,并做水洗测试再确认大货。

买方提示 · 硅胶热转印: 先确认面料是否有涂层或防水整理——这类面料需先做附着力测试再报价。

买方提示 · 刺绣: 请在打样照片上确认最小字号——刺绣在小尺寸下会丢失细节。

买方提示 · 织唛 / 织标: 小字号与细线条优先选织唛,这是最稳的做法。

买方提示 · Leather / PVC / rubber: 皮革与 PVC 适合有结构的部位(帽子、包袋、牛仔),不适合弹力裁片。

买方提示 · Tape, ribbon & draw cord: 织带与绳带按米或码下单,不按件。

三个问题即可决定

  1. 贴在哪里?面料与涂层决定哪些工艺能粘牢。
  2. 要什么效果?平面、立体、反光或夜光会改变工艺。
  3. 怎么上?熨烫、车缝、魔术贴或背胶决定背衬。

我们常见的错误

  • ✕未测试粘性就把硅胶标用在防水涂层布上。
  • ✕发低分辨率 JPG 却希望小字仍然清晰。
  • ✕忘记告知背衬——它会改变工艺和价格。

需要您提供什么

  • ✓AI 或 PDF 矢量稿,并附潘通 TCX 色号。
  • ✓标牌尺寸(毫米或厘米),以及所需背衬。
  • ✓成衣照片或面料成分(如有)。

下单大货前请准备这些信息

  • ✓标牌图稿、尺寸与期望工艺
  • ✓面料成分,以及是否有涂层或后整理
  • ✓贴合位置(附照片更好)
  • ✓预期水洗与使用条件
  • ✓是否需要可拆卸
硅胶热转印标的结构组成
示意图:硅胶热转印标的剖面结构,含织物层、胶层、硅胶层与离型膜
示意图,非工厂实拍
标牌的上标方式
示意图:四种标牌上标方式——熨烫、车缝、魔术贴与背胶
示意图,非工厂实拍
140×140

Scan the QR code